We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
 17.06.2007: Saab NG900 Shifter Housing RemovalHome 

[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [index]
Click to see the next picture
17.06.2007: Console removed
List the rear half of the console, then the front half. Remove the air duct.

Manual gear shifter housing removal installation on 1994-1998 Saab 900 and 1999-2002 Saab 9-3. I removed the housing to fit a short shifter.

The installation is the reverse of removal. The shifter alignment procedure must be performed after re-installation.

Tools:

  • 13 mm socket: linkage clamp;
  • 10 mm socket: centre console and shifter housing;
  • long socket extension;
  • ratchet handle;
  • Torx T25 screwdriver;
  • L-shaped 3 mm Allen key: gearbox lock.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.