|
| [expand all] 1 2 3 4 5 6 [index] | |  | | 18.12.2004: Cowl rear | |
The last screw in the rear. The cowl removal is not really necessary, but
it gives you a detailed view of the seatbelt attachment. You can clearly
see the torn part of my seat cover here.
|
|
The front seat removal procedure for a 1996 Saab 900. I had to take the
driver's seat out on my project car to replace the upholstery torn by the
previous owner. The installation is the reverse of removal. When fitting the
bolts, tighten the inner side first (factory recommended torque 22 ft-lbs).
Tools:
- Torx T40 socket: seat track bolts;
- Torx T27 socket or screwdriver: cowl screws;
- long flat screwdriver: to reach the seatbelt latch release;
- small wire cutters: to cut a zip tie under the seat;
- a new zip tie;
- torque wrench.
|
|
|
We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
