|
| [expand all] 1 2 3 4 5 6 [index] | |  | | 18.12.2004: Cowl front | |
Remove the screws in front of the cowl and in the middle (Torx T27).
The clearance is tight, you need a long screwdriver, but it won't
fit straight.
|
|
The front seat removal procedure for a 1996 Saab 900. I had to take the
driver's seat out on my project car to replace the upholstery torn by the
previous owner. The installation is the reverse of removal. When fitting the
bolts, tighten the inner side first (factory recommended torque 22 ft-lbs).
Tools:
- Torx T40 socket: seat track bolts;
- Torx T27 socket or screwdriver: cowl screws;
- long flat screwdriver: to reach the seatbelt latch release;
- small wire cutters: to cut a zip tie under the seat;
- a new zip tie;
- torque wrench.
|
|
|
We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
