|
| [expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [index] | |  | | 19.08.2008: Intake hose | |
Bolt the pipe to the bracket, insert the banjo bolt and connect the intake
hose. The vacuum nipple on the pipe was a bit larger than stock, so I had
to find a thicker elbow.
|
|
High flow turbo inlet pipe installation on a 1999 Saab 9-5. A shiny polished
stainless piece of art by
Taliaferro.
Prohibitively expensive and obsoleted by the Saab's own
2006+ cobra kit,
this inlet pipe is still a nice thing to have both for the performance
benefits it offers and the attention it grabs when you open the hood. It is a
recommended accessory for stage 3 and higher for those who prefer to stick
with the trusty old TD04 turbo, but wish to make it easier to breath
at the top end.
The installation takes under an hour. Let the car cool off, since you will
be working around the turbo - burning your hands is not fun. Be extra clean -
wipe the pipe thoroughly before installation and be careful not to introduce
any dirt into the intake or the turbo while it's open.
Tools:
- 13 mm socket and extention: heat shield, banjo and bracket bolts;
- 10 mm socket: return pipe screw;
- Torx T30 socket: turbo clamp and PCV line screw;
- flat screwdriver: screw-type hose clamps;
- pliers: spring-type hose clamps.
|
|
|
We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
