We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.

[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 [index]
Click to see the next picture
09.07.2006: Coolant inlet
Fit the inlet into the slot in front of cylinder #1. Make sure the flap on the inlet matches the cut-out on the right.

The installation of manifolds, pumps and other accessories on a Saab B204/B234 family engine. The work was done on a 1995 Saab 900SE turbo, but will also apply to any four cylinder 1994-1998 900 turbo and 1999 9-3. Newer cars using the B205/B235 engine family are also quite similar.

Tools:

  • 22 mm wrench: oil thermostat cap, oil pressure sensor;
  • 19 mm wrench: intake manifold coolant nipple;
  • 17 mm socket: temperature sender;
  • 16 mm socket: engine mount, starter;
  • 13 mm socket: oil filter housing, coolant pump, alternator, exhaust manifold, turbo;
  • 12 mm socket: thermostat, intake manifold, banjo bolts;
  • 10 mm socket: coolant pipes;
  • 8 mm Allen socket: alternator bolts, belt tensioner;
  • torque wrench;

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.