|
| [expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [index] | |  | | 18.06.2006: Compressed | |
When the spring is compressed, there's just enough room to insert the
collets using a pair of thin curved needle-nose pliers. Here's when
the grease on the collets comes in handy.
|
|
Saab B204/B234 cylinder head rebuild. This head is found in all four-cylinder
Saab 900 and 9000 from 1994 to 1998, as well as 1999 9-3.
Tools and supplies:
- 12 mm socket: camshaft cap bolts;
- 11 mm socket and extention: valve seal tapping (a metal
tube of a similar size will do as well);
- valve spring compressor: it should be able to reach down into
an inch-wide lifter socket;
- thin needle nose pliers (curved nose preferred);
- fresh engine oil.
|
|
|
We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
