We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
 01.04.2005: Saab NG900 Subframe BraceHome 

[expand all] 1 2 3 4 5 6 [index]
Click to see the next picture
01.04.2005: Hole
On the passenger side, there are two shields overlapping. You need to cut the end of the lower shield just like you did it on the other side, and then make a hole in the belt shield.

Two-point front suspension brace installation on the 1996 Saab 900. Parts from MP Performance.

Tools:

  • 11 mm socket;
  • short 11 mm wrench;
  • plastic cutting tools;
  • ramps or car jack and stands;
  • ratchet handle.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.