[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 [index]
Click to see the next picture
29.09.2004: Engine mount
Fit the engine mount bracket with a tightening torque of 39 ft-lbs for the bolts and 78 ft-lbs for the central nut. Fit the belt shield, the wheel, and lower the car to the floor.

Serpentine belt and pulley replacement on a Saab 9-5.

Tools and supplies:

  • serpentine belt: short (Saab #5590344, NAPA #25060950) or standard (Saab #4899548);
  • pulleys: small idle pulley (#4356127) and tensioner pulley (#5172184);
  • jack stands;
  • 18 mm socket: engine mount central nut;
  • 16 mm socket: engine mount side bolts;
  • 13 mm socket: idle pulley bolt;
  • 10 mm socket: power steering hose clamp;
  • 8 mm socket: belt shield screws;
  • 8 mm Allen key: belt tensioner bolt;
  • 6 mm Allen key: belt tensioner pulley bolt;
  • 3 mm long Allen key: belt tensioner lock;
  • 1/2" socket extension: for use as a tension release lever;
  • torque wrench.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.