We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.

[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 [index]
Click to see the next picture
21.05.2006: Throttle body inlet pipe
A ported throttle body inlet pipe: before and after.

Powertrain rebuild on the 1995 Saab 900 turbo convertible.

A few notes regarding the 2.3 engine swap. It has to be of the same generation, e.g. for NG900 you need a 2.3 turbo engine from a 1994-1998 9000 (B234E, B234L or B234R).

The head and the block are exactly the same. The timing and balancing gear is also the same. The end plate is identical. The only internal difference is the crankshaft with pistons (longer stroke), so you can either find a good 9000 engine and drop it straight in or rebuild your 2.0 with a crankshaft/rod/piston combo from a 2.3 turbo. The 2.3 N/A has the same crankshaft, but weaker pistons.

Further differences: the 9000 uses a different oil pan, timing cover, pumps, manifolds, mounts and other accessories. You will have to reuse all those parts from your original engine. The block will have the provisions for all configurations, but because the accessories are mounted differently, some bolt holes might be exposed to rust and need their threads refreshed.

The 9000 ECU is reported not to work correctly in NG900. A stock NG900 ECU will start and run with a 2.3, but it's certainly better if you can source a custom tune.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.