[expand all] 1 2 3 4 5 6 [index]
Click to see the next picture
15.07.2006: Rivet tool
The rivets are supplied to provide the rear mounting points. The round rivet goes into the round hole in the rear left corner of the subframe, and the tapered one goes into the square hole on the right side. You might need a hammer to fit it in. The odd nut and a bolt with washers are only needed to install the rivets into the subframe, and are not used for the brace itself.

Taliaferro six-point front subframe brace installation on a 1995 Saab 900. The subframe improves car's handling and does a great job in reducing the cowl shake on the convertibles. It fits all 1994-1998 900 and 1999-2002 9-3 models.


  • 14 mm socket: brace bolts;
  • 14 mm wrench: threadless nut for rivet compression;
  • torque wrench;
  • car jack and stands or ramps.


Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.