We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.

[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [index]
Click to see the next picture
03.07.2006: Crankshaft pulley
Slide the crankshaft pulley on (mind the oil seal in the oil pump cover) and tighten the 27 mm bolt to 130 ft-lbs.

Saab B204/B234 engine assembly. This engine is found in all four-cylinder Saab 900 and 9000 from 1994 to 1998, as well as 1999 9-3. Newer cars with B205/B235 engines have certain differences, but the procedure is largely the same.

Tools and supplies:

  • 27 mm socket: crankshaft pulley, timing chain tensioner;
  • 19 mm socket: flywheel;
  • 19 mm wrench: to hold camshafts when tightening;
  • 16 mm socket: spark plugs;
  • 14 mm socket: camshaft sprocket bolts;
  • 13 mm socket: drain plug;
  • 12 mm socket; chain tensioner plug, upper timing cover bolts;
  • Torx E16 socket: head bolts;
  • Torx T40 socket: timing cover, oil pan, valve cover;
  • Torx T30 socket: endplate, DI cassette, timing and balance chain gear;
  • torque wrench (or two - for high and low torque fasteners);
  • large snap ring pliers: oil pump cover;
  • rubber mallet;
  • gasket maker.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.