|
| [expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [index] | |  | | 13.02.2006: Unbolted | |
After the hard lines are off, pull the retainer clips from both ends.
The fuel hose gets in the way of removing the top clip, but it's doable.
Once the clips are off, pull the old rubber line.
|
|
Googridge stainless brake line installation on a 1996 Saab 900
(applies to all 1994-1998 900 and 1999-2002 9-3). This installation was
prompted by a cracked brake line, but is usually performed to enhance the
braking performance of the car.
Tools and supplies:
- 24 mm wrench: brake line retainer nuts (for Goodridge kit);
- 19 mm wrench: brake line nuts (for Goodridge kit);
- 17 mm socket: wheel bolts;
- 17 mm wrench: brake line nuts (for original rubber lines);
- 13 mm flare wrench: hard line nuts in the rear;
- 11 mm socket: banjo bolts on front calipers;
- 10 mm flare wrench: hard line nuts;
- pliers: brake line retainers;
- DOT4 brake fluid, 600 ml or more;
- pressure bleeder (recommended);
- torque wrench;
- car jack and axle stands;
- breaker bar.
|
|
|
We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
