We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.

[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [index]
Click to see the next picture
13.02.2006: Rear right
Raise the rear of the car and release the handbrake. Locate the brake line by the right rear spring. The clearance is tight, especially near the top end. Use a 13 mm flare wrench for the top hard line nut, 10 mm for the bottom.

Googridge stainless brake line installation on a 1996 Saab 900 (applies to all 1994-1998 900 and 1999-2002 9-3). This installation was prompted by a cracked brake line, but is usually performed to enhance the braking performance of the car.

Tools and supplies:

  • 24 mm wrench: brake line retainer nuts (for Goodridge kit);
  • 19 mm wrench: brake line nuts (for Goodridge kit);
  • 17 mm socket: wheel bolts;
  • 17 mm wrench: brake line nuts (for original rubber lines);
  • 13 mm flare wrench: hard line nuts in the rear;
  • 11 mm socket: banjo bolts on front calipers;
  • 10 mm flare wrench: hard line nuts;
  • pliers: brake line retainers;
  • DOT4 brake fluid, 600 ml or more;
  • pressure bleeder (recommended);
  • torque wrench;
  • car jack and axle stands;
  • breaker bar.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.