We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.

[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 [index]
Click to see the next picture
11.02.2006: Alignment tool
Install the clutch with the pressure plate and put the bolts in hand-tight. Insert the alignment tool and make sure the clutch plate it perfectly centered. Tighten the bolts alternately to 16 ft-lbs (12 mm socket).

Manual transmission installation on a 1996 Saab 900 (applies to all 1994-1998 900 and 1999-2002 9-3). The goal was to install a new clutch and replace the transmission with a newer, stronger unit. This article covers gearbox installation only, for removal refer to this section.

Tools:

  • 24 mm socket: transmission fill plug (9-3);
  • 22 mm crowfoot wrench: O2 sensors;
  • 19 mm socket: flywheel bolts;
  • 18 mm socket: transmission, subframe bolts;
  • 18 mm wrench: ball joint nuts;
  • 17 mm socket: wheel bolts;
  • 16 mm socket: subframe bolts, engine mounts;
  • 15 mm socket: transmission mount bolts, control arms (optional);
  • 13 mm socket: exhaust, downpipe, shift linkage, battery;
  • 13 mm wrench: delivery pipe bolt;
  • 12 mm socket: pressure plate bolts;
  • 11 mm socket: flywheel cover bolts, subframe brace nuts;
  • 10 mm socket: battery base bolts;
  • 9 mm wrench: battery terminals (13 mm on 9-3);
  • 8 mm Allen socket: transmission drain plug;
  • 8 mm hex screwdriver: lower shield screws;
  • 7 mm hex screwdriver: delivery pipe hose clamps (or a flat screwdriver);
  • 3 mm L-shaped Allen key: transmission lock;
  • engine support beam or engine crane;
  • car jacks and axle stands;
  • pressure bleeder and fresh brake fluid;
  • hand pump and a 40..50 cm long piece of clear tubing (if slave bleeding is needed);
  • fresh gearbox oil;
  • breaker bar.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.