We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.

[expand all] 1 2 3 4 5 6 7 8 9 10 11 [index]
Click to see the next picture
13.10.2005: Sleeve
The remaining bushing sleeve can be removed with a help of a hacksaw and a cold chisel.

Stanchion arm bushing replacement on a 1996 Saab 900SE turbo. The old worn out bushings are being replaced with upgraded polyurethane bushings made by Powerflex.

It is not totally necessary to pull the driveshaft or disconnect the control arms. You can even deal with the bushings right on the car, but the room would be rather tight.

Tools and supplies:

  • 32 mm (1¼") socket: hub centre nut;
  • 24 mm wrench and socket: stanchion arm to control arm bolts (for Taliaferro bushings);
  • 17 mm socket: wheel bolts;
  • 16 mm socket: stanchion arm to subframe bolts;
  • 15 mm socket: control arm to subframe bolts;
  • 13 mm socket: lower sway bar link nut;
  • 11 mm open wrench: upper part of sway bar link;
  • 10 mm Allen key: caliper bolts;
  • 5 mm Allen key: rotor index screw;
  • Torx T55 socket: stanchion arm to control arm bolts (for stock bushings);
  • gear puller and a hacksaw (for old bushing removal);
  • torque wrench;
  • car jack and axle stands;
  • breaker bar.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.