We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
 13.10.2005: Saab NG900 Inner CV BootHome 

[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 [index]
Click to see the next picture
13.10.2005: Driveshaft
Looks like my old boot was held by plastic wire ties, and there wasn't much grease left.

Inner CV boot replacement on a 1996 Saab 900SE turbo. The repair had to be done because the old boot developed a crack and started leaking grease.

Tools and supplies:

  • new CV boot kit: boot, clamps and grease;
  • 32 mm (1¼") socket: hub centre nut;
  • 17 mm socket: wheel bolts;
  • 15 mm socket: control arm to subframe bolt;
  • 13 mm socket: lower sway bar link nut;
  • 11 mm open wrench: upper part of sway bar link;
  • 10 mm Allen key: caliper bolts;
  • 5 mm Allen key: rotor index screw;
  • snap ring pliers;
  • torque wrench;
  • car jack and axle stands;
  • breaker bar;
  • hammer.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.