|
| [expand all] 1 2 3 4 5 6 7 8 9 10 11 12 [index] | |  | | 13.10.2005: Wheel removed | |
With the car still on the ground, remove the centre cap from the wheel
and loosen the hub nut using a 32 mm socket (a 1¼" will do)
and a breaker bar. Loosen the wheel bolts while you're at it too (17 mm
socket). Raise the car and remove the wheel.
|
|
Inner CV boot replacement on a 1996 Saab 900SE turbo. The repair had to be
done because the old boot developed a crack and started leaking grease.
Tools and supplies:
- new CV boot kit: boot, clamps and grease;
- 32 mm (1¼") socket: hub centre nut;
- 17 mm socket: wheel bolts;
- 15 mm socket: control arm to subframe bolt;
- 13 mm socket: lower sway bar link nut;
- 11 mm open wrench: upper part of sway bar link;
- 10 mm Allen key: caliper bolts;
- 5 mm Allen key: rotor index screw;
- snap ring pliers;
- torque wrench;
- car jack and axle stands;
- breaker bar;
- hammer.
|
|
|
We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
