|
| [expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [index] | |  | | 16.08.2005: Transmission mount | |
Attach the mount to the bracket, then put in the bolts attaching it to the
side member. You might need to raise or lower the jack to make it fit. Tighten
the bracket bolts to 29 ft-lbs.
|
|
Engine mount replacement on the 1996 Saab 900. The old mounts were severily
worn and broken, which caused excessive engine movement and shifting
difficulty at high boost. To firm things up further, the transmission
mount has been upgraded with a sport polyurethane mount from
Taliaferro.
Tools:
- 17 mm socket (rear mount);
- 16 mm socket (rear and transmission mounts);
- 15 mm socket (side mounts);
- 13 mm socket (gearshift linkage);
- 10 mm socket (throttle body inlet, plastic shields);
- 8 mm socket (plastic shields);
- 8 mm Allen socket (passenger side mount);
- two L-shaped 3 mm Allen keys;
- long socket extension;
- ratchet handle;
- torque wrench;
- flat screwdriver (throttle body clamps);
- hydraulic jacks and stands.
|
|
|
We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
