[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [index]
Click to see the next picture
04.07.2006: Camshafts
Fit camshaft sprockets, starting with the intake side. Check that both camshafts and the crankshaft remain at their "0" mark. Screw the sprocket bolts in but not tighten them yet.

Saab B204/B234 engine assembly. This engine is found in all four-cylinder Saab 900 and 9000 from 1994 to 1998, as well as 1999 9-3. Newer cars with B205/B235 engines have certain differences, but the procedure is largely the same.

Tools and supplies:

  • 27 mm socket: crankshaft pulley, timing chain tensioner;
  • 19 mm socket: flywheel;
  • 19 mm wrench: to hold camshafts when tightening;
  • 16 mm socket: spark plugs;
  • 14 mm socket: camshaft sprocket bolts;
  • 13 mm socket: drain plug;
  • 12 mm socket; chain tensioner plug, upper timing cover bolts;
  • Torx E16 socket: head bolts;
  • Torx T40 socket: timing cover, oil pan, valve cover;
  • Torx T30 socket: endplate, DI cassette, timing and balance chain gear;
  • torque wrench (or two - for high and low torque fasteners);
  • large snap ring pliers: oil pump cover;
  • rubber mallet;
  • gasket maker.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.