[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [index]
Click to see the next picture
05.11.2005: Hazard switch
Unplug the wires from the hazard light switch and the "fasten belts" light. There's one screw above the SID slot, and two under the stereo.

Dashboard and instrument cluster removal on a 1996 Saab 900 (the same applies to 1999-2002 9-3). My "Check Engine" light was not working, and I needed to replace the bulb. The pictures show the lower dash panel removed and the fuse box out -- this was a part of another job, and is not needed for dashboard removal. The only tool needed for the job is a Torx T25 screwdriver. Installation is the reverse of removal.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.