 |
| 29.03.2006: The kit |
|
The Saab mounting kit comes with everything you need to install a changer:
mounting brackets, bolts and nuts, and a plastic cover that protects
the changer.
|
 |
| 29.03.2006: Connector |
|
Most cars would be pre-wired for a changer with the harness hiding behind
a flap in the upholstery and the holes cut in the trunk floor. There was,
however, a lapse in some model years, so you might still need a harness.
|
 |
| 29.03.2006: Trim |
|
Lift the spare wheel cover and detach the plastic piece around the
trunk latch.
|
 |
| 29.03.2006: Bracket |
|
Pull the side trim and install the bracket.
|
 |
| 29.03.2006: Changer |
|
Restore the trim and attach the changer. Plug the wiring harness.
|
 |
| 29.03.2006: Cover |
|
Install the plastic cover and drive to the dealer to program the
changer with a Tech2.
|
We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
