We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.

[expand all] 1 2 3 4 5 6 [index]
Click to see the next picture
04.11.2007: Pads removed
First, remove the old rubber pads.

Aluminium pedal installation on a Saab 9-5.

The original pedal pads on the car got torn from heavy use, so I decided to replace them with a generic pedal kit from a local auto parts store. The mounting hole pattern differs between kits, so chose a kit that could be attached to your pedals without having to drill into the arm on the back on the pedal. I only had one hole that came too close, so I tapped the thread in it instead of using the nut on the back.

It might be good idea to cover the floor before you start drilling. Getting those metal shavings out of the carpet is not easy, even with a powerful vacuum cleaner.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.