[expand all] 1 2 3 4 5 6 [index]
Click to see the next picture
30.09.2007: Tight fit
Fit the new bar back in. Rotate the driver side bushing backwards so it can squeeze between the exhaust pipe and the subframe. If it's not going through, unhook the muffler hangers and lower the muffler to pass the bar through.

Rear anti-roll bar installation on a Saab 9-5. The thin original bar on this Linear model gets replaced with a thicker and stiffer Aero anti-roll bar to help reduce body roll and improve cornering.

Tools:

  • 17 mm socket: wheel bolts;
  • 16 mm socket: link bolts;
  • 15 mm wrench: bushing clamp nuts;
  • torque wrench;
  • car jack and axle stands.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.