[expand all] 1 2 3 4 5 6 [index]
Click to see the next picture
30.09.2007: Link
Detach the bolt holding the anti-roll bar link to the trailing arm. Unclip the ABS sensor wire. Undo the nut on the bushing using a wrench (a socket won't fit in there).

Rear anti-roll bar installation on a Saab 9-5. The thin original bar on this Linear model gets replaced with a thicker and stiffer Aero anti-roll bar to help reduce body roll and improve cornering.

Tools:

  • 17 mm socket: wheel bolts;
  • 16 mm socket: link bolts;
  • 15 mm wrench: bushing clamp nuts;
  • torque wrench;
  • car jack and axle stands.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.