[expand all] 1 2 3 4 5 6 [index]
Click to see the next picture
30.09.2007: Jack stands
Raise the car, secure it on jack stands and take the wheels off. Both sides need to be in the air, so the rear suspension is level.

Rear anti-roll bar installation on a Saab 9-5. The thin original bar on this Linear model gets replaced with a thicker and stiffer Aero anti-roll bar to help reduce body roll and improve cornering.

Tools:

  • 17 mm socket: wheel bolts;
  • 16 mm socket: link bolts;
  • 15 mm wrench: bushing clamp nuts;
  • torque wrench;
  • car jack and axle stands.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.