We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.

[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
[index]
Click to see the next picture
29.09.2007: Disconnected
Detach the knuckle housing from the strut. It might be a good idea to support the control arm from below so it doesn't strain the brake line with its weight.

Front suspension replacement on a Saab 9-5. The old and tired original dampers and springs are being upgraded with Bilstein Sport dampers and Eibach Pro Kit lowering springs. The strut mount and bearing are also getting replaced.

Tools:

  • 22 mm socket: Bilstein retainer nut (optional);
  • 21 mm socket: original retainer nut;
  • 18 mm socket: knuckle housing bolts, anti-roll bar link nut;
  • 18 mm wrench: new style anti-roll bar link nut;
  • 17 mm socket: wheel bolts;
  • 17 mm wrench: old style anti-roll bar link pin;
  • 10 mm socket: strut mount bolts;
  • 7 mm socket: new style anti-roll bar link pin;
  • 7 mm Allen socket: damper rod;
  • torque wrench;
  • vice-grips;
  • car jack and axle stands;
  • spring compressor.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.