We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.

[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [index]
Click to see the next picture
22.05.2007: Ball joint
Separate the ball joint using a proper separator. On the other hand, if you're planning to replace the arm anyway, you can go ahead and use the fork separator.

Lower control arm replacement on a 1996-1998 Saab 900 and 1999-2002 Saab 9-3. The guide also covers polyurethane bushings and ball joint boots. It's not necessary to unbolt the caliper (some pictures show it removed), but it gives you some extra room around the ball joint.

Tools:

  • 32 mm (1¼") socket: axle nut;
  • 24 mm socket: outer poly bushing nut;
  • 24 mm wrench: outer poly busing bolt;
  • 18 mm wrench: ball joint nut;
  • 17 mm socket: wheel bolts;
  • 15 mm socket: control arm to subframe bolt;
  • 13 mm socket: lower sway bar link nut, strut mount nuts;
  • 11 mm wrench: upper part of sway bar link;
  • 10 mm Allen key: caliper bolts (optional);
  • Torx T55 key: original outer bushing bolt;
  • torque wrench;
  • car jack and axle stands;
  • ball joint separator;
  • breaker bar;
  • two pairs of long nose pliers;
  • hacksaw;
  • hammer and rubber mallet.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.