We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.

[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [index]
Click to see the next picture
20.05.2007: Clamp
Release the clamp on the airbox inlet pipe. This clamp often becomes rusty, so don't hesitate to just cut it if nothing else works. You won't need it later.

High flow intake installation on a 2003 Saab 9-5. Another quality Taliaferro product, comes with a reusable K&N filter, adapter and mounting hardware. Replaces the restrictive stock airbox and allows you to hear turbo spool-up and bypass valve discharge sounds.

The installation takes less than an hour. The car should be placed on ramps or jack stands to provide enough room for airbox removal.

Tools:

  • 13 mm socket and extention: adapter bolt;
  • 10 mm socket: headlight screws;
  • 8 mm socket: headlight and inlet pipe screws;
  • Torx T25 socket: lower shield screws;
  • flat screwdriver: hose clamps;
  • car ramps or jack and stands.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.