 |
| 18.01.2006: Wipers |
|
Undo wiper arm nuts with a 13 mm socket.
|
 |
| 18.01.2006: Wipers off |
|
Lift the arms and remove them from the car.
|
 |
| 18.01.2006: First cover |
|
Raise the hood and pull the rubber strip from the top of the firewall.
Remove the top cover over the blower and wiper motor.
|
 |
| 18.01.2006: Second cover |
|
Remove the inner cover. Careful not to crack it as it's rather thin.
|
 |
| 18.01.2006: Wiper motor |
|
Unscrew the wiper motor and rods (three 10 mm bolts).
|
 |
| 18.01.2006: Old filter |
|
Clean the leaves and junk, pull the old filter.
|
 |
| 18.01.2006: New vs old |
|
Look at them side by side. The old filter is filth incarnate!
|
 |
| 18.01.2006: New filter |
|
New filter installed.
|
 |
| 18.01.2006: Wiper motor |
|
Attach the wiper motor and connect the harness.
|
 |
| 18.01.2006: Inner cover |
|
Fit the thin inner cover.
|
 |
| 18.01.2006: Washer hose |
|
Connect the washer hose (there's a fitting that goes through the cover).
|
 |
| 18.01.2006: Outer cover |
|
Attach the outer cover: it goes under the strip on the windshield and hooks
to the firewall on the other side. Fit the rubber band on the firewall.
|
