We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
 14.09.2005: Saab NG900 ECU ReplacementHome 

[expand all] 1 2 3 4 [index]
Click to see the next picture
14.09.2005: Harness
Before removing the ECU, disconnect the battery or pull the "Trionic" fuse (#28). Move the carpeting away. Unlock ECU harness by pulling the lever and unplug it. Undo a screw in the lower right corner. The ECU slides down.

ECU (engine control unit) replacement on a 1996 900 turbo. The original ECU is being replaced with an upgraded unit from Nordic.

Tools:

  • 10 mm socket: bolt under the glovebox;
  • Torx T25 screwdriver: glovebox and ECU screws.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.