We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.

[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [index]
Click to see the next picture
09.09.2005: Clamp
Adjust the position of the exhaust system, make sure the pipes are level and don't rub against the body or the heat shield. Tighten the clamp on the middle joint.

Sport exaust installation on the 1996 Saab 900. The old exhaust system is being replaced with a "sport" cat-back exhaust from the Saab Catalog. The new exhaust is fully stainless, has a straight throught middle pipe and a small muffler in the back. It produces a nice rumbling sound at idle and a proper aggressive note on acceleration. In the same time it manages to remain quiet at cruising speeds.

Tools:

  • 13 mm socket;
  • ratchet handle;
  • muffler cement;
  • ramps or jacks and stands.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.