|
| [expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [index] | |  | | 09.07.2005: Old and new | |
The minimum thickness for the rotors is 8 mm. The new ones measure at 10 mm.
The old ones were only worn down to 9 mm, but they had deep grooves and
a lot of rust.
|
|
Rear brake pad and rotor replacement on a 1999 Saab 9-5. The car has the
early style fixed rear calipers, so this guide will also apply to
NG900 and 9-3's.
Tools:
- 18 mm socket: caliper bolts;
- 17 mm socket: wheel bolts;
- 10 mm wrench: handbrake cable bracket (9-5 only);
- Torx T30 socket: rotor index screws;
- thin punch and a hammer;
- long socket extensions;
- long flat screwdriver;
- impact driver;
- drill and screw extractor (optional);
- wire brush;
- torque wrench;
- car jacks and stands.
|
|
|
We have a new home on Github! Go right ahead to bookmark and contribute... Or stay here if you like 2000's websites.
