[expand all] 1 2 3 4 5 6 [index]
Click to see the next picture
01.04.2005: Bolt
Locate a small oval hole in the subframe that used to be under the shield you just cut. Insert the bolt with a big washer supplied with the brace. The purpose of the washer is to distribute the load evently.

Two-point front suspension brace installation on the 1996 Saab 900. Parts from MP Performance.


  • 11 mm socket;
  • short 11 mm wrench;
  • plastic cutting tools;
  • ramps or car jack and stands;
  • ratchet handle.


Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.