[expand all] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 [index]
Click to see the next picture
18.12.2004: Staples
On the bottom of the seat back, there are five staples that hold the ends of the upholstery together. The staples are rather thick, you need two pairs of needle nose pliers to handle them.

The front seat upholstery repair on a 1996 Saab 900 (should be very similar on other Saabs too). The previous owner left a huge tear on a side bolster, and the condition of the seat back in whole wasn't the best, so it seemed like a good idea to reskin it. We used fabric instead of leather to provide superior back support during the club's driving events. It is possible to pull the upholstery while the seat is in the car, but it's much easier if you remove the seat first.

Tools and supplies:

  • two pairs of strong needle nose pliers: to bend the staples;
  • long flat screwdriver: to remove the headrest sleeves and lumbar knob;
  • upholstery fabric and thread;
  • soft foam backing of fiber-fill;
  • general sewing supplies.

 

 
Copyright © 2000-2013 Dmitry Platonoff
All rights reserved.